UK VENTILATION GEN 26 - Flipbook - Page 15
RANGE
R410
VENTILATION
AHU connection kit MAH3M for 3-Pipe ECOi EX MF3
Series · R410A
CONEX Bluetooth®
control built-in.
CZ‑RTC6BL
Model
5 HP
10 HP
PAW-160MAH3M
PAW-280MAH3M
28,0
Cooling capacity
kW
14,0
Heating capacity
kW
16,0
31,5
Cool Min / Max
m³/h
1 140 / 2 600
3 500/ 5000
0,9
0,9
HxWxD
mm
500 x 400 x 150
500 x 400 x 150
Air flow
Bypass factor recommended
Dimension
Net weight
kg
11,5
11,5
Pipe length range
m
10 ~ 100
10 ~ 100
Elevation difference (in / out)
Piping diameter
Intake temperature of AHU connection kit
Ambient temperature of outdoor unit
Max
m
10
10
Liquid
Inch (mm)
3/8 (9,52)
3/8 (9,52)
7/8 (22,22)
Gas
Inch (mm)
5/8 (15,88)
Cool Min ~ Max
°C DB
+18 ~ +32
+18 ~ +32
Cool Min ~ Max
°C WB
+13 ~ +23
+13 ~ +23
Heat Min ~ Max
°C
+16 ~ +30
+16 ~ +30
Cool Min ~ Max
°C
‑10 ~ +43
‑10 ~ +43
Heat Min ~ Max
°C
‑20 ~ +15
‑20 ~ +15
Technical focus
· Maximum capacity / system: 10 HP (28 kW)
· Maximum piping length: 100 m (120 m equivalent)
· Elevation difference (indoor unit / indoor unit): 4 m
· In / out capacity ratio: 50~100%
· Maximum number of AHU connection kits: 4 units*
· Outdoor temperature range in heating: ‑20 ~ +15 °C
· Available temperature range for the suction air at AHU
connection kit: cool: +18 ~ +32 °C / heat: +16 ~ +30 °C
· The systems is controlled by the suction air (or room
return air) temperature (same as standard indoor unit)
· The discharge air temperature is also controlled to
prevent too‑low air discharge in cooling or too‑high air
discharge in heating (in case of VRF)
· Demand control (forcible thermostat‑OFF control by
operating current)
2
1
3
4
9
8
5
6
7
10
· Defrost operation signal, Thermo‑ON / OFF states output
· Drain pump control (drain pump and the float switch to
be supplied in local)
· External target temperature setting via indoor / outdoor
signal interface is available with CZ‑CAPBC2 (Ex. 0‑10 V)
· Demand control 40% to 120% (5% steps) by 0‑10 V input
signal
· Connectable with S‑Link system. Special care for
electrical noise may be necessary depending on the
on‑site system
· Fan control signal from the PCB can be used to control
the air flow (high / mid / low and LL for Th‑OFF). Need to
change the fan control circuit wiring at field
*To be simultaneous operation controlled by one remote controller sensor.
System and regulations. System overview.
1 | AHU Unit equipment (field supplied)
2 | AHU Unit system controller (field supplied)
3 | AHU connection kit controller box (with control PCB)
4 | Thermistor for discharge air
5 | Electronic expansion valve
6 | Thermistor for gas pipe (E3)
7 | Thermistor for liquid pipe (E1)
8 | Thermistor for suction air
9 | Inter‑unit wiring
10 | ECOi or ECOi G outdoor unit
Optional controller.
Timer remote controller.
CZ‑RTC5B.
15
